Any size, made to your dimensions Minimum order 500 Free dieline and blank sample Speak to a specialist: 1-800-555-0142 Mon–Fri 9–6 EST
Shop Tuck Boxes FOLDING CARTON SPECIALISTS
Cart 0 Free sample Request a quote
The catalogue

Tuck Boxes

44 tuck cartons in tuck boxes, cut to any footprint your product needs. Printed, finished and shipped flat from our own plant, with a free dieline and an unprinted blank before you commit.

Request a quote Browse the range
  • Any size, no tooling charge
  • Minimum order from 100
  • Free dieline and blank sample
The range

Pick the style, then the size

Construction decides unit cost, how the box is packed and how much weight it carries. Every one of these is cut to your dimensions at stock pricing.

Filter

Showing 13–24 of 44 results
BX-TUC-026 Dank Vape Boxes Printed tuck carton with holographic finishing and a cartridge insert, for the street-brand aesthetic. Minimum 250 units. 1 stock size View → BX-TUC-031 Dessert Boxes Small window carton with a board tray for individual desserts and slices. Minimum 250 units. 1 stock size View → BX-TUC-025 Disposable Vape Boxes High-volume tuck carton for disposable devices, with tamper seal and authentication panel. Minimum 500 units. 1 stock size View → BX-TUC-029 Donut Boxes Shallow window box with a locking lid and grease-resistant liner, in 4, 6 and 12 counts. Minimum 250 units. 1 stock size View → BX-TUC-022 E-Liquid Boxes Tuck carton for 10 ml to 120 ml e-liquid bottles, with a child-resistant option and compliance panels. Minimum 250 units. 1 stock size View → BX-TUC-013 Eyeliner Boxes Very narrow tuck carton for pencil and liquid liners, with hang hole and tamper tab options. Minimum 250 units. 1 stock size View → BX-TUC-041 Favor Boxes Small die-cut favour box in kraft, white or metallised board, folded flat with no glue. Minimum 250 units. 1 stock size View → BX-TUC-044 Gift Card Boxes Small carton or folder holding a gift card in a die-cut slot. Minimum 500 units. 1 stock size View → BX-TUC-020 Hemp Boxes Uncoated kraft or hemp-blend tuck carton with water-based inks. Minimum 250 units. 1 stock size View → BX-TUC-042 Hexagon Boxes Six-sided folding box with a locking base and a tuck or lift-off lid. Minimum 250 units. 1 stock size View → BX-TUC-037 Kraft Boxes Uncoated recycled kraft tuck carton with water-based inks. Curbside recyclable as supplied. Minimum 250 units. 1 stock size View → BX-TUC-038 Kraft Card Boxes Heavier kraft card carton with a white-lined inner face, for a natural outside and printable inside. Minimum 250 units. 1 stock size View →
Option library

Everything you can specify

Any option here can go on any construction. All of them are priced in your quote, so you can see what each one costs before you commit to it.

SBS C1S 18pt Bright white coated one side. The default for full colour work.
SBS C2S 24pt Coated both sides, heavier caliper for weight or tall cartons.
Natural kraft 18pt Uncoated brown face. Warm, but fibre shows under dark solids.
White kraft 20pt Bleached kraft with a clean printing face.
Recycled CRB 20pt 100% recycled content, grey back, lowest cost per sheet.
Food-grade barrier Grease and moisture barrier for direct food contact.
Offset print Best cost and colour above 2,500 units. Plates held for reruns.
Digital print No plate charge, so short runs and versioned artwork stay cheap.
Pantone spot Mixed to formula and matched on press for brand colours.
Soy-based ink Renewable binder, same colour output, fully recyclable.
Water-based ink Low solvent, standard on food-contact cartons.
Fluorescent ink For shelf pop where CMYK cannot reach the colour.
Matte AQ Water-based, low sheen, cheapest protective coating.
Gloss AQ Water-based with a light shine. Scuff resistant.
Gloss UV Cured under UV for a hard, high-shine surface.
Spot gloss UV Gloss on a named area only, matte elsewhere.
Soft touch lamination Velvety film. Premium feel, shows fingerprints on black.
Matte lamination Film rather than coating. Deepest blacks, best durability.
Hot foil stamping Metallic foil pressed with a heated die. Gold, silver, custom.
Cold foil Foil applied inline with print. Cheaper over large areas.
Blind embossing Raised motif with no ink or foil.
Blind debossing Recessed motif, reads well on uncoated kraft.
Registered embossing Emboss aligned to printed artwork within tolerance.
Combination emboss and foil Raised and foiled in one pass for a 3D mark.
Window patching Die-cut aperture with clear film, PET or PLA.
Board inserts Folded insert to hold the product still in the carton.
Tamper seal Perforated or glued seal for evidence of opening.
Hang hole Euro slot or round hole for peg display.
Child-resistant closure Push-and-slide closure for regulated products.
Braille Embossed braille panel for pharmaceutical work.
Not seeing the option you need? We source specialty board, films and closures on request. Ask a specialist
Boards

Which board for which job

BOARD CALIPER FACE BEST FOR RECYCLABLE
SBS 18pt 0.018" White, coated Most products under 1 lb, full colour print Yes
SBS 24pt 0.024" White, coated Tall cartons, 1–4 lb, rigid feel Yes
Natural kraft 18pt 0.018" Brown, uncoated One and two colour work, natural brands Yes
White kraft 20pt 0.020" White out, brown in Clean face with a kraft interior Yes
Recycled CRB 20pt 0.020" Grey, coated front Cost-driven runs, secondary packaging Yes
Working with us

Support at every stage, not just at the order

1

Structural advice

Send the product and its weight. We name the construction that fits and say when a cheaper one will do the job.

2

Dieline and proof

A layered dieline with bleed and creases marked, then a digital proof before anything goes on press.

3

Blank samples

An unprinted box in your exact size and board inside three business days, at no charge.

4

Reruns that match

Colour targets are recorded against your job, so the third order matches the first without a new proof cycle.

FAQ

Frequently asked questions

Minimums, turnaround, tooling and samples across the whole range.

Yes. Open "Standard size pricing" on any product page and add the size you need to the cart. Everything custom goes through the spec form instead.

No. Our die tables cut to your inside dimensions within each family at stock pricing.

From 100 units on rigid and tuck styles, 250 to 500 on litho-printed cartons and bags. Each product page states its own minimum.

Ten to fourteen business days from artwork approval, plus transit. Foil, lamination and inserts add two to four days.

Post us the box you use now, or send photos with dimensions. We reverse the dieline and quote against it.

Yes, freight is quoted separately against the pallet count and destination.

Not sure which construction fits your product?

Send the product dimensions and weight. Our structural team names the construction that fits, and tells you when a cheaper one will do the job.

Request a quote Free blank sample