Industries
44 tuck cartons in industries, cut to any footprint your product needs. Printed, finished and shipped flat from our own plant, with a free dieline and an unprinted blank before you commit.
- Any size, no tooling charge
- Minimum order from 100
- Free dieline and blank sample
Pick the style, then the size
Construction decides unit cost, how the box is packed and how much weight it carries. Every one of these is cut to your dimensions at stock pricing.
Showing 1–12 of 44 results
BX-TUC-033
Bath Bomb Boxes
Kraft or printed tuck carton with an optional window, sized to standard bath bomb diameters. Minimum 250 units.
1 stock size
View →
BX-TUC-030
Burger Boxes
Clamshell board box with a locking front tab and vent holes, for burgers and hot sandwiches. Minimum 500 units.
1 stock size
View →
BX-TUC-035
Business Card Boxes
Small tuck or two-piece carton for card decks of 100 to 500. Minimum 500 units.
1 stock size
View →
BX-TUC-039
Bux Board Boxes
Recycled bux board carton — dense, fully recycled greyboard stock at a low unit cost. Minimum 500 units.
1 stock size
View →
BX-TUC-028
Cake Boxes
Grease-resistant board cake box with a window and a locking base. Minimum 250 units.
1 stock size
View →
BX-TUC-027
Cannabis Vape Boxes
Compliance-led tuck carton for regulated vape products, with certified child-resistant options. Minimum 250 units.
1 stock size
View →
BX-TUC-017
CBD Oil Boxes
Tuck carton with a fitted insert for tincture and dropper bottles, sized 10 ml to 100 ml. Minimum 250 units.
1 stock size
View →
BX-TUC-032
Cereal Boxes
Tall litho-printed carton with a tuck top and glued base, for cereal and dry goods. Minimum 500 units.
1 stock size
View →
BX-TUC-021
Cigarette Boxes
Hinged-lid or slide-and-shell carton for cigarette and pre-roll packs, with inner frame. Minimum 500 units.
1 stock size
View →
BX-TUC-036
Clamshell Boxes
Hinged board clamshell with a locking front tab, as a plastic-free alternative to blister packs. Minimum 500 units.
1 stock size
View →
BX-TUC-019
Concentrate Boxes
Small tuck carton for glass or silicone concentrate containers, with a child-resistant option. Minimum 250 units.
1 stock size
View →
BX-TUC-007
Crash Lock Bottom Boxes
Folding carton with a pre-glued self-locking base. Opens square in one motion, holds heavier contents than a tucked base. Minimum…
1 stock size
View →
Everything you can specify
Any option here can go on any construction. All of them are priced in your quote, so you can see what each one costs before you commit to it.
SBS C1S 18pt
Bright white coated one side. The default for full colour work.
SBS C2S 24pt
Coated both sides, heavier caliper for weight or tall cartons.
Natural kraft 18pt
Uncoated brown face. Warm, but fibre shows under dark solids.
White kraft 20pt
Bleached kraft with a clean printing face.
Recycled CRB 20pt
100% recycled content, grey back, lowest cost per sheet.
Food-grade barrier
Grease and moisture barrier for direct food contact.
Offset print
Best cost and colour above 2,500 units. Plates held for reruns.
Digital print
No plate charge, so short runs and versioned artwork stay cheap.
Pantone spot
Mixed to formula and matched on press for brand colours.
Soy-based ink
Renewable binder, same colour output, fully recyclable.
Water-based ink
Low solvent, standard on food-contact cartons.
Fluorescent ink
For shelf pop where CMYK cannot reach the colour.
Matte AQ
Water-based, low sheen, cheapest protective coating.
Gloss AQ
Water-based with a light shine. Scuff resistant.
Gloss UV
Cured under UV for a hard, high-shine surface.
Spot gloss UV
Gloss on a named area only, matte elsewhere.
Soft touch lamination
Velvety film. Premium feel, shows fingerprints on black.
Matte lamination
Film rather than coating. Deepest blacks, best durability.
Hot foil stamping
Metallic foil pressed with a heated die. Gold, silver, custom.
Cold foil
Foil applied inline with print. Cheaper over large areas.
Blind embossing
Raised motif with no ink or foil.
Blind debossing
Recessed motif, reads well on uncoated kraft.
Registered embossing
Emboss aligned to printed artwork within tolerance.
Combination emboss and foil
Raised and foiled in one pass for a 3D mark.
Window patching
Die-cut aperture with clear film, PET or PLA.
Board inserts
Folded insert to hold the product still in the carton.
Tamper seal
Perforated or glued seal for evidence of opening.
Hang hole
Euro slot or round hole for peg display.
Child-resistant closure
Push-and-slide closure for regulated products.
Braille
Embossed braille panel for pharmaceutical work.
Which board for which job
Support at every stage, not just at the order
Structural advice
Send the product and its weight. We name the construction that fits and say when a cheaper one will do the job.
Dieline and proof
A layered dieline with bleed and creases marked, then a digital proof before anything goes on press.
Blank samples
An unprinted box in your exact size and board inside three business days, at no charge.
Reruns that match
Colour targets are recorded against your job, so the third order matches the first without a new proof cycle.
Frequently asked questions
Minimums, turnaround, tooling and samples across the whole range.
Yes. Open "Standard size pricing" on any product page and add the size you need to the cart. Everything custom goes through the spec form instead.
No. Our die tables cut to your inside dimensions within each family at stock pricing.
From 100 units on rigid and tuck styles, 250 to 500 on litho-printed cartons and bags. Each product page states its own minimum.
Ten to fourteen business days from artwork approval, plus transit. Foil, lamination and inserts add two to four days.
Post us the box you use now, or send photos with dimensions. We reverse the dieline and quote against it.
Yes, freight is quoted separately against the pallet count and destination.
Not sure which construction fits your product?
Send the product dimensions and weight. Our structural team names the construction that fits, and tells you when a cheaper one will do the job.