CBD Packaging – Shop Tuck Boxes

The range

Pick the style, then the size

Construction decides unit cost, how the box is packed and how much weight it carries. Every one of these is cut to your dimensions at stock pricing.

Showing all 7 results

BX-TUC-017 CBD Oil Boxes Tuck carton with a fitted insert for tincture and dropper bottles, sized 10 ml to 100 ml. Minimum 250 units. 1 stock size View → BX-TUC-021 Cigarette Boxes Hinged-lid or slide-and-shell carton for cigarette and pre-roll packs, with inner frame. Minimum 500 units. 1 stock size View → BX-TUC-019 Concentrate Boxes Small tuck carton for glass or silicone concentrate containers, with a child-resistant option. Minimum 250 units. 1 stock size View → BX-TUC-022 E-Liquid Boxes Tuck carton for 10 ml to 120 ml e-liquid bottles, with a child-resistant option and compliance panels. Minimum 250 units. 1 stock size View → BX-TUC-020 Hemp Boxes Uncoated kraft or hemp-blend tuck carton with water-based inks. Minimum 250 units. 1 stock size View → BX-TUC-016 Pre-Roll Boxes Narrow tuck carton for single or multi-pack pre-rolls, with child-resistant options. Minimum 250 units. 1 stock size View → BX-TUC-018 Tincture Boxes Tuck carton for tincture bottles with a board collar and tamper seal. Minimum 250 units. 1 stock size View →

Option library

Everything you can specify

Any option here can go on any construction. All of them are priced in your quote, so you can see what each one costs before you commit to it.

SBS C1S 18pt Bright white coated one side. The default for full colour work.

SBS C2S 24pt Coated both sides, heavier caliper for weight or tall cartons.

Natural kraft 18pt Uncoated brown face. Warm, but fibre shows under dark solids.

White kraft 20pt Bleached kraft with a clean printing face.

Recycled CRB 20pt 100% recycled content, grey back, lowest cost per sheet.

Food-grade barrier Grease and moisture barrier for direct food contact.

Offset print Best cost and colour above 2,500 units. Plates held for reruns.

Digital print No plate charge, so short runs and versioned artwork stay cheap.

Pantone spot Mixed to formula and matched on press for brand colours.

Soy-based ink Renewable binder, same colour output, fully recyclable.

Water-based ink Low solvent, standard on food-contact cartons.

Fluorescent ink For shelf pop where CMYK cannot reach the colour.

Matte AQ Water-based, low sheen, cheapest protective coating.

Gloss AQ Water-based with a light shine. Scuff resistant.

Gloss UV Cured under UV for a hard, high-shine surface.

Spot gloss UV Gloss on a named area only, matte elsewhere.

Soft touch lamination Velvety film. Premium feel, shows fingerprints on black.

Matte lamination Film rather than coating. Deepest blacks, best durability.

Hot foil stamping Metallic foil pressed with a heated die. Gold, silver, custom.

Cold foil Foil applied inline with print. Cheaper over large areas.

Blind embossing Raised motif with no ink or foil.

Blind debossing Recessed motif, reads well on uncoated kraft.

Registered embossing Emboss aligned to printed artwork within tolerance.

Combination emboss and foil Raised and foiled in one pass for a 3D mark.

Window patching Die-cut aperture with clear film, PET or PLA.

Board inserts Folded insert to hold the product still in the carton.

Tamper seal Perforated or glued seal for evidence of opening.

Hang hole Euro slot or round hole for peg display.

Child-resistant closure Push-and-slide closure for regulated products.

Braille Embossed braille panel for pharmaceutical work.

Not seeing the option you need? We source specialty board, films and closures on request. Ask a specialist

Boards

Which board for which job

BOARD CALIPER FACE BEST FOR RECYCLABLE

SBS 18pt 0.018" White, coated Most products under 1 lb, full colour print Yes

SBS 24pt 0.024" White, coated Tall cartons, 1–4 lb, rigid feel Yes

Natural kraft 18pt 0.018" Brown, uncoated One and two colour work, natural brands Yes

White kraft 20pt 0.020" White out, brown in Clean face with a kraft interior Yes

Recycled CRB 20pt 0.020" Grey, coated front Cost-driven runs, secondary packaging Yes

Working with us

Support at every stage, not just at the order

1

Structural advice

Send the product and its weight. We name the construction that fits and say when a cheaper one will do the job.

2

Dieline and proof

A layered dieline with bleed and creases marked, then a digital proof before anything goes on press.

3

Blank samples

An unprinted box in your exact size and board inside three business days, at no charge.

4

Reruns that match

Colour targets are recorded against your job, so the third order matches the first without a new proof cycle.

FAQ

Frequently asked questions

Minimums, turnaround, tooling and samples across the whole range.

Yes. Open "Standard size pricing" on any product page and add the size you need to the cart. Everything custom goes through the spec form instead.

No. Our die tables cut to your inside dimensions within each family at stock pricing.

From 100 units on rigid and tuck styles, 250 to 500 on litho-printed cartons and bags. Each product page states its own minimum.

Ten to fourteen business days from artwork approval, plus transit. Foil, lamination and inserts add two to four days.

Post us the box you use now, or send photos with dimensions. We reverse the dieline and quote against it.

Yes, freight is quoted separately against the pallet count and destination.

Not sure which construction fits your product?

Send the product dimensions and weight. Our structural team names the construction that fits, and tells you when a cheaper one will do the job.

Request a quote Free blank sample